digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 id100-id106 silicon controlled rectifier 0.5 amp available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings rating symbol id100 ID101 id102 id103 id104 id105 id106 unit repetitive peak off state voltage v drm 30 60 100 150 200 300 400 volts repetitive peak reverse voltage v rrm 30 60 100 150 200 300 400 volts dc on-state current 75c ambient 100c case i t 250 0.5 ma amps repetitive peak on-state current i trm 6 amps peak one cycle surge (non-repetitive) on-state current i tsm up to 30 amps peak gate current i gm 250 ma average gate current i g(av) 25 ma reverse gate voltage v gr 6 volts storage temperature range t stg -65 to 150 c operating temperature range t j -65 to 125 c electrical characteristics (t a = 25c unless otherwise noted) characteristics symbol min typ max unit test condition off-state current (id100-id104) - 5.0 50 a v drm = rating, r gk = 1k, t = 125c off-state current (id105-id106) i drm - 10.0 100 a v drm = rating, r gk = 1k, t = 125c reverse current (id100-id104) - 10.0 50 a v rrm = rating, r gk = 1k, t = 125c reverse current (id105-id106) i rrm - 15.0 100 a v rrm = rating, r gk = 1k, t = 125c - 5.0 200 a v d = 5v, r gs = 10k gate trigger current i gt - - 500 a v d = 5v, r gs = 10k, t = -40c 0.40 0.55 0.8 v v d = 5v, r gs = 100 ? - - 1.0 v v d = 5v, r gs = 100 ? , t =- -40c gate trigger voltage v gt 0.10 - - v v d = 5v, r gs = 100 ? , t = 125c peak on-state voltage v tm - - 1.7 v i t = 1a (pulse) - 1.0 5.0 ma r gk = 1k holding current i h - - 10.0 ma r gk = 1k, t = -40c turn-on time t on - 0.5 - s i g = 10ma, i t = 1a, v d = 30v circuit commutated turn-off time (id100-id104) - 8.0 - s i t = i r = 1a, r gk = 1k ? circuit commutated turn-off time (id105-id106) t q - 15.0 - s i t = i r = 1a, r gk = 1k ? blocking voltage ratings apply over the full operating temperature range, provided the gate is connected to the cathode through an appropriate resistor, 1000 ohms or smaller, or other adequate gate bias is used. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 id100-id106 silicon controlled rectifier 0.5 amp mechanical characteristics case to-18 marking alpha-numeric pin out see below to-18 inches millimeters min max min max a 0.209 0.230 5.310 5.840 b 0.178 0.195 4.520 4.950 c 0.170 0.210 4.320 5.330 d 0.016 0.021 0.406 0.533 e - 0.030 - 0.762 f 0.016 0.019 0.406 0.483 g 0.100 bsc 2.540 bsc h 0.036 0.046 0.914 1.170 j 0.028 0.048 0.711 1.220 k 0.500 - 12.700 - l 0.250 - 6.350 - m 45c bsc 45 bsc n 0.050 bsc 1.270 bsc p - 0.050 - 1.270 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 id100-id106 silicon controlled rectifier 0.5 amp sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 id100-id106 silicon controlled rectifier 0.5 amp sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
|
